Max Machinery Explosion Proof Install - Manual (Page 4)

33A Healdsburg Avenue
Healdsburg, CA 95448
T + 1 707.433.2662
F + 1 707.433.1818
Max Machinery, Inc.
maxmachinery.com
EXInstallEnglish_001Q2.pdf • Rev2 • © 08/14/2013 Max Machinery, Inc. `
EC Declaration of Conformity
We, Max Machinery Inc. declare as manufacturer under our sole responsibility that the product series EX295/EX296
Explosion Proof Flow Transmitter is in conformity with the provisions of the European Community Directives as shown
below.
Applicable Series: Part numbers of the format EX295-xx1-x00 and EX296-xx1-x00 where ‘x’ does not affect conformity
to the standards.
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
EN 61000-6-2:2005 Electromagnetic Immunity
EN 61000-6-4:2007 Electromagnetic Emission
ATEX Directive 94/9/EC designed and manufactured in accordance with Annex II of the Atex Directive
EN 60079-0:2009
Explosive atmospheres general requirements
(Note: no routine verification and tests are required by clause 27)
EN 60079-1:2007
Protection by flameproof enclosures type d”
Designation: 0539 II 2 G Ex d IIB Tx Gb
EC Type examination certificate DEMKO 11 ATEX 1013058X Rev 1 provided by
UL International DEMKO A/S NB Number: 0539
P.O. Box 514, Lyskaer 8, DK-2730 Herlev, Denmark
Product quality assurance notification #11 ATEX Q1116140 provided by UL Demko
Production control done to ISO 9001:2008, certificate #C2010-01864
May 24, 2011
Bryan R. Snyder Max Machinery Inc.
Engineering Manager 33A Healdsburg Ave.
Healdsburg, CA USA
(707) 433-2662