How to set the dust cup, How to remove the dust cup, How to use the dust cup – MAX PJR265(CE) User Manual
Page 19

19
10. LED lamp
(Fig. Y) When the Trigger switch is pulled, the
LED lamp (Fig. Y 6) lights up.
When 10 ~ 15seconds past after releasing the
Trigger switch, it goes off.
• Do not directly look in the LED lamp's light.
• Do not point the LED lamp's light to any-
one's eyes.
Pointing the LED lamp's light to the eyes may
cause serious injury.
11. Dust cup (Optional)
• When attaching the Dust cup to the tool,
keep hands and fingers away from the Trig-
ger switch, and make sure that the Battery
pack is not set in the tool.
The Dust cup reduces falling down of the dusts
when overhead drilling / hammer-drilling.
The Dust cup is available as an optional acces-
sory.
HOW TO SET THE DUST CUP
(Fig. Z) Fit the
portion to the side handle.
HOW TO REMOVE THE DUST CUP
(Fig. AA) Hold near the bottom of the Dust cup,
then take it out.
• Before removing the Dust cup, eject the
dust in the Dust cup.
HOW TO USE THE DUST CUP
(Fig. AB) Fit the front end of the Dist cup to the
object, then operate the tool.
• When operating the tool, do not hold the
Dust cup.
If the tool is held at the Dust cup, it may drop
off and cause serious injury.
Make sure to hold the tool with both hands, at
the Side handle and the grip.
• Use the Dust cup only for Concrete, Brick
and Stone applications.
Do not use for Metal and other objects.
Using the Dust cup for Metal and other objects
may damage the Dust cup, due to the hot
ground metal pieces or like.
• When storing the Dust cup, do not com-
press it.
If the Dust cup is kept compressed for a long
time, it may not be unable to recover the origi-
nal shape.
12. Drilling / Hammer-drilling times
per charge
• Regarding the drilling / hammer-drilling
times per charge, it depends on the condi-
tion of the Battery pack, hardness of the
material and the performance of the bit.
The following chart is based on the brand-new
battery and hammer-drilling in Concrete.
WARNING
WARNING
CAUTION
Mode
Bit diameter
Depth
Drilling times
Slow
φ4.3mm
30mm
Apprx. 221
Normal
φ6.5mm
30mm
Apprx. 184
Normal
φ12.5mm
30mm
Apprx. 105
Normal
φ14.5mm
100mm
Apprx. 20
Normal
φ18mm
60mm
Apprx. 26
Normal
φ26mm
60mm
Apprx. 7
WARNING
WARNING
CAUTION
CAUTION
PJR265_CE.book 19 ページ 2010年10月13日 水曜日 午後4時51分