Mastercool 69788 RECOVERY_RECYCLE_RECHARGE - Manual (Page 20)

20
TEMPERATURE
Select TEMPERATURE:
WEIGHT oz(lb)
PRESSURE psi
TEMPERATURE ˚ F
EXIT
Press ENTER to change from °C to °F or from °F to °C.
WEIGHT oz(lb)
PRESSURE psi
TEMPERATURE ˚ F
EXIT
Select another parameter or EXIT to go to the previous screen.
DATA
This menu shows all the data read by the machine.
Switch the machine on. The MAIN MENU will appear after a few seconds:
AUTOMATIC PROCEDURE
ASSISTED PROCEDURE
Ref avail X,XX lb
Select NEXT MENU:
CALIBRATION
SERVICE ALARM
TANK CHARGING
Select DATA AND CONFIGURAT.:
CONFIGURATION
SERVICES
PREVIOUS MENU
Select DATA.
The following screen will be displayed:
Ref avail xx.xx lb
Tank temp. xx ˚ F
Tp: xx psi ACp: xx psi
NOTE: TP: xx psi will be flashing
- Ref avail.: quantity of refrigerant available in the storage tank.
- Tank temp.: temperature of the refrigerant storage tank.
- Tp: pressure of refrigerant tank.
- ACp: pressure in the external air conditioning system.
PASSWORD PROTECTION
A password can be used to prevent the machine from being used. Once a password is activated, it will be needed every time the operator makes an
attempt to activate any command from the MAIN screen. To use the password feature,