Asus A7S333 - Manual (Page 89)

ASUS A7S333 motherboard user guide 73
Plug & Play O/S [No]
This field allows you to use a Plug-and-Play (PnP) operating system to
configure the PCI bus slots instead of using the BIOS. When [Yes] is selected,
interrupts may be reassigned by the OS. If you installed a non-PnP OS or if
you want to prevent reassigning of interrupt settings, keep the default setting
[No]. Configuration options: [No] [Yes]
Boot Virus Detection [Enabled]
This field allows you to set boot virus detection, ensuring a virus-free boot
sector. The system halts and displays a warning message when it detects a
virus. If this occurs, you can either allow the operation to continue or use a
virus-free bootable floppy disk to restart and investigate your system.
Configuration options: [Disabled] [Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping
retesting a second, third, and fourth time. Configuration options: [Disabled]
[Enabled]
Boot Up Floppy Seek [Enabled]
When enabled, the BIOS will seek the floppy disk drive to determine whether
the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled]
Interrupt Mode [APIC]
This parameter offers a choice between PIC and APIC interrupt modes. The
default is [APIC]. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This field enables the display of the full screen logo that appears as the
PC boots up. Configuration options: [Disabled] [Enabled]