Asus A7S333 - Manual (Page 38)

26 Chapter 2: Hardware information
7) Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS.
You can clear the CMOS memory of date, time, and system setup parameters
by erasing the CMOS RTC RAM data. The RAM data in CMOS is powered
by the onboard button cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Remove the jumper cap from the Normal position and place it on
the [1-2], Clear CMOS position. After 5 seconds, replace the
jumper cap to the Normal position.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the key during the boot process and enter BIOS
setup to re-enter data.
A7S333 ®
A7S333 Clear RTC RAM
CLRTC
Normal Clear CMOS
(Default)
1 2 2 3