Bios setup – Asus 820E User Manual

Page 47

ASUS CUC2 User’s Manual

4. BIOS SETUP

4. BIOS SETUP

6. When prompted to confirm the BIOS update, press Y to start the update.

7. The utility starts to program the new BIOS information into the flash ROM. The

boot block will be updated automatically only when necessary. This will mini-
mize the chance that a failed update will prevent your system from booting up.
When the programming is finished, Flashed Successfully will be displayed.

Updating BIOS

8. Follow the onscreen instructions to continue.

WARNING!

If you encounter problems while updating the new BIOS, DO NOT

turn off your system since this might prevent your system from booting up. Just
repeat the process, and if the problem still persists, update the original BIOS file
you saved to disk above. If the Flash Memory Writer utility was not able to
successfully update a complete BIOS file, your system may not be able to boot
up. If this happens, your system will need servicing.

This manual is related to the following products:

CUC2