Asus 820E - Manual (Page 40)

40 ASUS CUC2 User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
21) USB Headers (5-pin USB2, 10-1 pin USB47, 10-1 pin USB56)
If the USB Ports on the back panels are inadequate, three USB headers are avail-
able for five additional USB ports. Connect the 5-pin ribbon cable from the
provided 3-port USB connector set to the midboard 5-pin USB header and the
10-1 pin ribbon cable to one of the two midboard 10-1 pin USB headers and
mount the USB connector set to an open slot on your chassis.
CUC2
®
CUC2 USB Headers
USB56
USB2
1 5
6 10
1
USB Power USBP- USBP+ GND
1: USB Power
2: USBP1–
3: USBP1+
4: GND
5: NC 6: USB Power
7: USBP2–
8: USBP2+
9: GND
USB47