Hardware setup – Asus 820E User Manual
Page 33
ASUS CUC2 User’s Manual
33
3. HARDWARE SETUP
Connectors
3. H/W SETUP
DMA Channels
3. H/W SETUP
8) Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-
tion when using ribbon cables with pin 5 plugged).
CUC2
®
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
CUC2 Floppy Disk Drive Connector
PIN 1
FLOPPY
7) Audio Port Connectors (Three 1/8” GAME_AUDIO) (optional)
Line Out (lime) can be connected to headphones or preferably powered speak-
ers. Line In (light blue) allows tape players or other audio sources to be re-
corded by your computer or played through the Line Out (lime). Mic (pink)
allows microphones to be connected for inputting voice.
Mic
Line In
Line Out
1/8" Stereo Audio Connectors