beautypg.com

Magnum Venus Plastech Powerhead MPH_UPPH_VPH–5000 Series User Manual

Page 19

background image

MPH / UPPH / VPH – 5000 Series Manual

Rev. 5/2012

Page | 19

6. Install the Valve Exhausts (MPH-5009) onto the Upper and Lower Valve Blocks.

One side of the Valve Exhausts has three holes, one of the holes must line up with
the machined holes in the Upper and Lower Valve Block. (See Figure 4)

Figure 4:
Do not block the hole in the valve block when installing the
valve exhaust.

















7. Install the two Socket Head Cap Screws (FCS- 04C-08-SS) into each of the two

Valve Exhausts and snug tight.

8. Install Valve End Caps (MPH-2521) into the Upper and Lower Valve Blocks and

lightly snug tight.

















Do not block hole