AT&T 1480 - Manual (Page 15)

12
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the
ringer off and extend the battery life.
1 Make sure the handset is off.
2 Press
G to enter programming mode.
3 Press
> until the screen displays RINGER:.
4 Press
S. The screen displays the current setting.
5 Press
< or > to select 1, 2, 3, 4, or OFF. You will hear a
sample of each ring.
6 Press
S to choose the displayed ringer setting.
Temporary Tone Dialing (Base or Handset)
If you have dial pulse (rotary) service, you can change from dial pulse
to touch tone dialing during a call by pressing
*. This is useful if you
need to send touch tone signals for access to telephone banking or
long-distance services.
1 Dial the number.
2 Press
*. Buttons pressed after this send touch tone signals.
3 After you hang up, the phone automatically returns to
dial pulse (rotary) service.
Headset
You can use this telephone with any
industry standard 2.5 mm headset
(purchased separately). For best
results, use an AT&T 2.5 mm headset.
Plug the headset into the jack
located on the left side of the
handset (under the small rubber flap)
or into the jack on the right side of
the base Do not force the connection,
but make sure the plug fits securely.
TELEPHONE OPERATION
AT THE HANDSET
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 12