beautypg.com

Magnum Venus Plastech PATRIOT 5 PAT-PH-5000 Series User Manual

Page 19

background image

PAT-PH-5000 Series Powerhead Manual

Rev. 05/2012

Page | 19

10. Insert the diaphragms (MPH-5010) into the upper and lower valve blocks with the

outside leading edge of the diaphragms facing out. Push the diaphragms all the
way down into the valve block bore.

11. Install the valve exhausts (MPH-5009) onto the upper and lower valve blocks

using the two socket head cap screws (F-CS-04C-08-SS) into each of the two
valve exhausts and snug tight.

12. Install valve end caps (MPH-2521) into the upper and lower valve blocks and

lightly snug tight.

13. Connect the air line to the side of the valve block.


Set the Valve block assembly aside for now, it will be installed later.