Magnum Venus Plastech PATRIOT 5 PAT-PH-5000 Series - Manual (Page 15)

PAT-PH-5000 Series Powerhead Manual
Rev. 05/2012 Page | 15
Introduction:
This manual covers the repair of the 5” diameter by 2” stroke length Patriot Powerhead
assemblies:
• PAT-PH-5000 Patriot Powerhead Assembly
• PAT-PH-5000-CA Patriot Powerhead Assembly – Multi-Color unit
• PAT-PH-5000-SSB Patriot Powerhead Assembly – SSB unit
• PAT-PH-5000-INV
Patriot Powerhead Assembly – Innovator unit
The reassembly will require the use of removable thread locking compound, Lithium
grease (08465) and SUPERLUBE O-ring lubricant.
Please read the manual carefully. Follow the steps in the order given, otherwise you
may damage the equipment or injure yourself.
During Disassembly . . .
As you disassemble the equipment, layout the components in the correct order and
direction. This will help you to reassemble them.
Tools required:
• Medium Removable Thread Locking Compound
• Brown Grease (08465)
• Super O-ring Lube (SUPERLUBE)
• 7/16-inch Socket Head Wrench (08472)
• Hex Wrench Set (08469)
• 9/16-inch Wrench (08476)
• 12-inch Adjustable Wrench (08468)
• Flat Blade Screw Driver
• Snap Ring Pliers
NOTE: Before starting any service work, release fluid and air pressure
from system. Remove the two air lines from the air motor. The air
motor assembly does not have to be completely removed from the
system for service work.