Operating instructions – Lectrosonics RCWTEL User Manual
Page 2
Operating Instructions
The RCW-TEL is connected to the TH3 via the tele-
Pin 4 (VD) - Volume Down Switch function - decreases
phone or codec DB-9
Remote Control Ports. The
the receive volume level by 1 dB until volume limit is
wiring configuration has the following format:
reached.
Pin 1 (CS) - Connect/Disconnect Switch function -
Pin 5 (PL) - Privacy LED - indicates if the privacy
connects or disconnects the interface.
function is currently active.
Pin 2 (PS) - Privacy Switch function - mutes the
Pin 6 (CL)Connect/Disconnect LED - indicates if the
transmitted audio, received audio, or both according
interface is connected.
to the selected privacy mode. (see TH3 manual for
Pin 7 (GND) - Ground connection.
details)
Pin 3 (VU) - Volume Up Switch function - increases
the receive volume level by 1 dB until volume limit
is reached.
TH3 Remote
Control Connector
Connect
Privacy
Volume Up
Volume Down
NC
Privacy LED
Connect LED
Ground
NC
1
2
3
4
5
6
7
8
9
5
3
2
1
4
6
7
RCW-TEL
Connector
CS
PS
VU
VD
PL
CL
GND
RCWTEL-0301
581 Laser Rd NE - Rio Rancho, NM - 87124 USA
(800)821-1121 (505)892-4501 Fax(505)892-6243
www.lectrosonics.com