Lectrosonics WM - Quick Start Guide - Manual (Page 4)

LECTROSONICS, INC. 4
Battery Compartments
The battery compartments are a rugged, straightforward design with a recessed entry
that captures the O-ring on the cap. The spring contact on the cap maintains solid
contact on the battery regardless of its exact length.
The O-rings should be kept clean and dry, and coated with petroleum jelly on a regular
basis. See page 11 of the manual on line for more information on preventing corrosion.
Attaching and Removing the Michrophone
The threaded WP watertight plug on the microphone cable fits into a recessed jack on
the top panel. The recess in the opening retains the O-ring when the plug is tightened.
The Lectrosonics M152WP lavaliere microphone is supplied with the WP plug already
installed. Other microphones can also be terminated with this plug by following the
instructions included with the WP connector kits.
Treat O-ring with petroleum jelly before connecting (see above)
Operating Instructions
Power Up and Boot Sequence
S imultaneously press and hold the AUDIO and FREQ buttons until the startup count
is completed. The screen will display a count from 1 to 3 as the unit boots up, then it
switches to the Audio screen. As the unit turns on, the Modulation LEDs and PWR LED
all glow red, then green, and then revert to normal operation.