LEADER LV5382 - Manual (Page 2)

LEADER INSTRUMENTS CORPORATION
11095 Knott Avenue, Suite B - Cypress, CA 90630
[email protected] www.LeaderAmerica.com
Revision 01/13
MAIN FEATURES (cont.):
The LV5382 always keeps a backup of the current
settings. When the LV5382 is restarted, it can be
used with the same settings that were in use before
it was turned off.
IDs can be assigned to input signals.
The LV5382 can deliver the embedded audio of
an SDI signal or HDMI signal in stereo through the
headphone output jack.
AVAILABLE OPTIONS:
3D ASSIST - OP04: 3D video signals can be evaluated by applying the video signals for the left eye to
channel A and the video signal for the right eye to channel B. The available picture display formats are
anaglyph, convergence, overlay, and wipe.
REMOTE AND TALLY - OP72: The addition of the remote and tally option enables the LV5382 to load
presets and display tallies according to the signals that it receives through the rear-panel remote control
connector. This allows the LV5382 to be linked to a switcher or other device.
BATTERY MOUNT IDX - OP73: To mount an IDX battery.
BATTERY MOUNT ANTON - OP74: To mount an Anton Bauer battery.
DIMENSIONS (W x H x D): 8 1/2” x 6 7/8” x 3 3/8” (215mm x 176mm x 85mm)
WEIGHT: 2.1 Kg (4.6 lbs)
POWER REQUIREMENTS:
Voltage: 10 to 18 V
DC
Power Consumption: 40 W max.
LV5382 Rear Panel