LEADER LV5980 - Manual

W
AVEFORM MONIT
OR
LV5980 MULTI SDI MONITOR
The Convenience of Four Sources in a 17” Monitor
The LV5980 is a waveform monitor with a 17-inch TFT display that can be used to monitor up to four SDI signals
simultaneously. It is optimized for the level adjustment of the outputs of multiple installed cameras. In the video
signal waveform display, vector display and picture display, multiple input signals can be displayed on top of each
other or lined up next ot each other. It is also full of useful features such as a level meter display for embedded
audio, an error display that indicates transmission errors and a 5-bar display that shows video signal peak levels
using five bars. Furthermore, the LV5980 can show different combinations of these displays in its multi-screen
display.
MAIN FEATURES:
Simultaneously monitors 4 HD/SD SDI sources.
Accepts Dual Link and 2K formats.
Displays a wide variety of display formats:
Waveform, Vector, Picture, 5-Bar, Audio and Status
Displays.
CINELITE ® II (CineLite ® and CineZone) and
CINELITE ® ADVANCED.
XGA (1024 x 768) screen for superb, crisp
waveforms and picture representations.
Screen Capture feature
Supports Histogram and 3D Assist.
Can display up to four input SDI signals on top of
each other or side by side. This makes it suitable
for adjusting the gain and black balance values of
multiple cameras.
Can display Embedded Audio as Lissajous, Bars,
Level Meter.
Stores up to 30 presets.
Accepts a tri-level sync signal or an NTSC or PAL
black burst signal as its external sync signal and
use it as a reference.