Laurel Electronics Laureate 6-Digit Process Meter & Analog Signal Totalizer - Manual (Page 5)

LAUREL ELECTRONICS INC., 3183-G Airway Ave., Costa Mesa, CA 92626, USA • Tel 714-434-6131 • www.laurels.com 5
Ordering Guide
Create a model a model number in this format: L50000VF1, IPC
L5 Standard Main Board, Green LEDs
L6 Standard Main Board, Red LEDs
L7 Extended Main Board, Green LEDs
L8 Extended Main Board, Red LEDs Main Board
Note: With Standard Main Board: rate, square root of rate, or totalized rate from
transducers with a DC output. With Extended Main Board: above plus custom curve
linearization, batch control operation, 1/rate (time).
Power
(isolated) 0 85-264 Vac
1 12-32 Vac or 10-48 Vdc
Relay Output
(isolated) 0 None
1 Two 8A Contact Relays
2 Two Solid State Relays
3 Four 8A Contact Relays
4 Four Solid State Relays
Analog Output
(isolated) 0 None
1 Single isolated 4-20 mA, 0-20 mA, 0-10V, -10 to +10V
2 Dual isolated 4-20 mA, 0-20 mA, 0-10V
Digital Interface
(isolated) 0 None
1 Isolated RS-232
2 Isolated RS-485
4 Isolated Modbus RS-485
5 USB
6 USB-to-RS485 converter
Voltage-to-Frequency Converter
VF1 V-to-F Converter, 4-20 mA
VF2 V-to-F Converter, 0-1 mA
VF3 V-to-F Converter, 0-10 V
VF4 V-to-F Converter, Special Range. Signal Input
(isolated)
In the write-in field of your invoice, specify min input, min reading; max input, max
reading. Component changes by the factory may be required.
Add-on Options BL Blank Lens without Button Pads
CBL01 RJ11-to-DB9 Cable
CBL02 USB-to-DB9 Adapter
CBL05 USB Cable, A to B
IPC
Splash-proof Cover
BOX1 NEMA-4 Enclosure
BOX2
NEMA-4 Enclosure plus IPC