Hardware installation – Airlink101 AIC1620POE User Manual
Page 5
4
Hardware Installation
Step 2.1
Assemble and attach the provided wall mount kit to the camera.
Step 2.2
Connect one end of a network cable to the IP Camera and connect
the other end to one of the LAN ports on your router or switch.
Step 2.3
If your router or switch does not support Power over Ethernet
function, you will need to provide power to the camera by connecting the
supplied power adapter. If you are connecting the camera to a PoE
switch/router, you do NOT need to connect the power adapter.
Section 2