Airlink101 AIC1620POE - Manual (Page 4)

3
Rear View
* The camera’s Ethernet port supports IEEE 802.3af Power-over-Ethernet (PoE) standard that
enables DC power to be supplied to the camera using wires in the connecting twisted-pair
cable. Any 802.3af compliant device attached to the port can directly supply power to the
camera over the twisted-pair cable without requiring its own separate power source. This
capability gives the network administrator centralized power control, which translates into
greater network availability.
GPIO and RS485
is used to connect the
external devices.
Reset Button will restart the
camera when it is pressed quickly;
when it is pressed and held for five
seconds, the camera will restore
the factory default settings.
DC Power Connector
connects the AC power
adapter, in order to supply
power to the camera. Ethernet Cable Connector*
connects the network cable,
which supports the NWay
protocol so that the camera
can detect the network speed
automatically.
Audio I/O Connectors:
Audio Out connects an
external active speaker.
Mic In connects an external
microphone.