Impulse AHP-1070 - Manual

01-7
01
Features
Specifications
In
dus
tri
al H
M
I T
ouc
h P
ane
l S
olu
tio
ns
Onboard TI OMAP 600 MHz ■ ■
7” 300 Nits WVGA LED Backlight ■ ■
Fanless Operation ■ ■
256MB Flash ROM, Max. 256MB DDR ■ ■
Slim Design: 45 mm ■ ■
WiFi (Optional) ■ ■
7” WVGA HMI Touch Panel Computer With Onboard TI OMAP 600 MHz Processor
System
Processor TI OMAP 600 MHz
System Memory LP DDR 128 MB RAM (up to 256MB)
LCD/CRT Controller Integrated in TI Processor
Ethernet 10/100Base-TX, RJ-45 x 1
I/O Port
RS-232 x 1,RS-232/422/485 x 1, USB2.0 x 2, USB client x 1, LAN x 1, VGA
out x 1
Storage Disk Drive 256 MB NAND FLASH on board /SD card x 1 Expansion
Expansion Slot Mini Card x 1 (USB interface only)
OS support Windows® CE 6.0 , Linux
Mechanical
Construction IP-65, NEMA 4 rugged protection, plastic front bezel
Color Bezel: Patone 5425C , Rear cover: RAL 7040
Mounting VESA 75/ Panel
Dimension 8.8” (W) x 6.14” (H) x 1.77” (D) (225mm x 156mm x 45mm)
Carton Dimension 11.4” (W) x 7.48” (H) x 9’” (D) (290mm x 190mm x 230mm)
Gross Weight 4.41 lb (2 kg)
Net Weight 1.54 lb (0.7 kg)
Environmental
Operating Temperature 32°F ~ 122°F (0°C ~ 50°C) (Ambient with airflow)
Storage Temperature -4°F ~ 140°F (-20°C ~ 60°C)
Storage Humidity 5%~90% @ 40°C; non-condensing
Vibration 3 g rms/ 5~ 500Hz/ operation – With SD
Shock 20 G peak acceleration (11 msec. duration)
EMC CE/FCC class A
Power Supply
DC input DC 12V w/ 2-pin terminal block
LCD
Display Type 7" TFT-LCD
Max Resolution 800 x 480
Max. Colors 262K colors
Luminance 300 cd/m 2
Viewing Angle 140°(H), 120°(V)
Back Light LED
Back Light MTBF (hours) 30,000
Touchscreen
Type 5-wire, Analog Resistive
Resolution 2048 x 2048
Light Transmission >80%
Life time 35 Million activations
AHP-1070
10/100Base-TX
USB x 2
VGA Power On/Off
RS-232/422/485
RS-232
USB Client
DC 12V input