Onboard lan boot rom [enabled, Ht width [auto, Ht speed [800 mhz – Asus Motherboard M2S-X User Manual
Page 67
ASUS M2S-X
2-25
OnBoard SiS190 Lan DEVICE
[Enabled]
OnBoard LAN Boot ROM
[Disabled]
SouthBridge SiS965/SiS965L Configuration
Onboard SiS190 Lan DEVICE [Enabled]
Allows you to enable or disable the onboard SIS 190 Lan controller.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Enabled]
Allows you to enable or disable the onboard LAN Boot ROM.
Configuration options: [Disabled] [Enabled]
HyperTransport Configuration
Method to setup HT link
[Auto]
HT Width
[16 BIT]
HT Speed
[800 MHz]
HyperTransport Configuration
Method to setup HT link [Auto]
Allows you to setup HT link frequency/width by auto/manual. Configuration
options: [Auto] [Manual]
HT Width [Auto]
Allows selection of HyperTransport upstream data width.
Configuration options: [8 BIT] [16 BIT]
HT Speed [800 MHz]
Sets the HyperTransport frequency from CPU to the NorthBridge.
Configuration options: [200 Mhz] [400 Mhz] [800 Mhz]
The following items appear only when the Method to setup HT link is set
to [Manual].