Asus Motherboard M2S-X - Manual (Page 64)

2-22 Chapter 2: BIOS Setup
Memclock Mode [ Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or
select [Limit] to set using one of the standard values.
Configuration options: [Auto] [Limit] [Manual]
The following items appear when the Memclock Mode is set to [Limit] or
[Manual].
Memclock Value [400MHz]
This item sets the Memclock value.
Configuration options: [400MHz] [533MHz] [667MHz] [800MHz]
The following items appear only when the MCT Timing Mode is set to
[Manual].
CAS Latency (CL) [Auto]
Sets the CAS Latency. Configuration options: [Auto] [3.0] [4.0] [5.0]
[6.0]
TRCD [Auto]
Sets the TRCD. Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6
CLK]
TRP [Auto]
Sets the TRP. Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6
CLK]
TRAS [Auto]
This item sets the TRAS. Configuration options: [Auto] [5 CLK] [6 CLK] [7
CLK] [8 CLK] [9 CLK] [10 CLK] [11 CLK] [12 CLK] [13 CLK] [14 CLK] [15
CLK] [16 CLK] [17 CLK] [18 CLK]
Command Timing (2T mode) [Auto]
Sets the Command Timing. Configuration options: [Auto] [1T] [2T]
MCT Timing Mode [Auto]
Allows you to set the MCT timing mode. Set by the code using [Auto]
or select [Manual] to set using one of the standard values. Configuration
options: [Auto] [Manual]