CognitiveTPG Advantage DLX - Manual (Page 2)

Connecting Power, Loading Media, Installing Software
Follow these Steps To Set Up the Advantage DLX Printer:
1 2 3
1
Printer Power Test
2
Connecting Data Cable
Connecting Power to the Advantage DLX
Press the Power Switch to the ON position.
Note: The Power Light will turn green to indicate the unit is receiving
power. The Ready Light will first turn red, then green.
Press the Power Switch to OFF before proceeding to the next steps.
1
Note: Ethernet model not pictured
Installing CognitiveTPG Printer Administrator and Printer Driver
Connect USB, Serial, Parallel or Ethernet Cable to
the back of the printer.
Connect opposite end of data cable to computer. 2
Note: For more detailed information on installing drivers and configuring your printer using
CognitiveTPG Printer Administrator, please refer to the
Advantage DLX Users Guide located
in the download section of the product webpages.
Follow the applicable instructions under the Utility Section.
Go to http://www.CognitiveTPG.com/Downloads_18.aspx using your Internet Browser.
1
2
Page 2