CognitiveTPG A760 - Manual (Page 3)

Print Test and Configuration Menu Sample. Samples will vary depending on the printer model.
The A760 is LogoEZ® compatible for ease of setting-up your logo and two-color design needs.
d
Route cables as shown
for your setup configuration
(page 22).
6
Run a diagnostic test to test the printer (page 22).
7
Configure the printer if necessary (page 28 and Programming
Communication Interface Chapter for commands descriptions and usage).
Note: For Ethernet connection, specific setup
commands must be entered. See A760
Programming supplement to configure the
printer for Ethernet.
The paper type can be changed
in the configuration menu.
Paper types and grades available:
Type 0 - Monochrome grades
Kanzaki P-310
Type 1 - Two-color grades
Kanzaki P-310 RB (red/black)
Type 4 - Two-color grades
Kanzaki P-320 BB (blue/black)
Type 5 - Two-color grades
Kanzaki P-320 RB (red/black)
See User and Programming guides for more
information.
When the printer is configured for USB
and the native USB solution driver is
used, this location will show either:
“USB Driver Type: TPG, Inc.” or
“USB Driver Type: Printer Class”.
If the RS-232C, USB emulation solution
driver is used, nothing is printed here.
See User Guide, Appendix A.