CNB SDN-23Z27FW - Manual (Page 28)

XPEED Outdoor Series WWW.CNBTEC.COM
4. OSD Menu
⊙
Swing Setup
• SWING NO. [1~8]
Selects Swing number to edit. If a selected Swing has not defined, “NOT USED” is
displayed in 1st Position and 2nd Position.
• 1ST POS.
2ND POS. [PRESET 1~128]
Set up the 2 position for Swing function.
If a selected preset is not defined, “UNDEFINED” will be displayed as shown
below.
When swing function runs, camera moves from the preset assigned as the 1st
point to the preset assigned as the 2nd point in CW(Clockwise) direction. Then
camera moves from the preset assigned as the 2nd point to the preset assigned
as the 1st point is CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point is same as the preset assigned as
the 2nd point, camera turns on its axis by 360° in CW direction and then it turns
on its axis by 360° in CCW direction.
• SWING SPEED [1°/sec~180/°sec]
Sets Swing speed from 1°/sec to 180°/sec.
• CLEAR SWING [CANCEL/OK]
Deletes current Swing data.
28