AVE Time-Date-Character-Title TDCT-Pro - Manual (Page 6)

6
Following is a detailed description of the Menu selections
and the programming capabilities of the TDCT-Pro.
3.2 Main Programming Menu
Note: If a sub menu has an "EXIT" selection, always go there and
press "SET". Pressing "RESET" at the main menu exits you from
the program
3.3 Set Master / Slave
This programming feature can be used to select the TDCT-Pro as a
master or slave or a stand-alone unit. The Following menu appears
when you select the Set Master Slave from the main menu.
PROGRAMMING CONT.
Figure 3: TDCT-Pro main menu
•
Set Master/ Save
•
Time & Date
•
Set Time & Date
•
Reset Time & Date
•
Titler
•
Screen Setup
•
Communication
•
Help
•Set Address MSTR/ANY/0..254
•Exit