AVE Parallel Device with DB-25 Connectors P-2-RS User Manual
Mave, P-2-rs installation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P-2-RS Installation
mAVE
STRENGTH IN THE BUSINESS^
Parallel Device with DB-25 Connectors
The DB-9 to DB-9 cable
hooks the P-2-RS
to the VSI-Pro
DB-9F
DB-9M
This DB-25M Connector
plugs into the P-2-RS
P-2-RS
VSI-Pro
The pin out for the cable between the
P-2-RS and the VSI-Pro is as follows:
P-2-RS DB-9F
3---------------
1------------------------------------
VSI-Pro DB-9M
-----------2
5
The device’s parallel
cable plugs back into
this DB-25M Connector
This DB-25F
Connector plugs
into the device’s
parallel port
Refer to the VSI-Pro Operation Manual for further
instructions on programming your VSI-Pro.
Table of contents