Avocent 416 User Manual
Page 28

22
AutoView 424 Installer/User Guide
Administrator Commands Features List
Command Description
Add Channel
Set up the channel name, address, ID and scan dwell times.
Edit Channel
Edit the channel name, address, ID and scan dwell times.
Delete Channel
Delete a channel from the Administrator Channel List.
Administrator Functions
Set up administrator, users, channel switching, port setup
and FLASH upgrade.
Scanning
Initiate the mode where the switch scans from port to port.
Reset PS/2 Standard Mse/Kbd Reset the mouse and keyboard to restore
correct settings.
Reset PS/2 Wheel Mse/Kbd
Reset the mouse and keyboard to restore correct settings.
Version Information
Access the version information about your system.
To access the Administrator Commands menu:
1. Press the keyboard Control key twice within one second.
2. In non-secure mode, the Administrator Channel List appears.
-or-
In secure mode, the User Login window appears. Type in your
user name and press Enter. The Administrator Channel List appears.
-or-
In secure mode, if you are the system administrator, log in as Admin, Root
or Administrator. Type your password and press Enter. The Administrator
Channel List appears.
3. Press the keyboard Control key twice within one second again. The
Administrator Commands menu appears.
4. Press
the
Up or Down Arrow keys to select a specific menu or command.
5. Press
Enter to access a screen or activate a command.
-or-
Press Escape to exit the window without saving changes.