INTELLINET NETWORK 524698 Wireless 150N USB Adapter User Manual User Manual
Page 16
802.1
x
s
etting
/C
ertiFiCation
EAP Method: The EAP authentication protocols supported by this
adapter require that settings be consistent with the wireless access
points or routers that the adapter is intended to connect.
• PEAP & TTLS: These protocols are similar and easier to use than
TLS (below) in that they specify a stand-alone authentication protocol
to be used within an encrypted tunnel. TTLS supports any protocol
within its tunnel, including CHAP, MS-CHAP, MS-CHAPv2, PAP and
EAP-MD5. PEAP specifies that an EAP-compliant authentication
protocol be used; this adapter supports EAP-MSCHAP v2, EAP-TLS/
Smart Card and Generic Token Card. The client certificate is optional.
• TLS/Smart Card: This is the most secure of the EAP protocols, but
isn’t easy to use: It requires that digital certificates be exchanged in
16
CONFIGURATION
RADIUS
Server
Windows 2000 IAS
(Internet Authentication
Service)
IEEE 802.1x
Access Client
Access Point
RADIUS
Client
1
2
3
4
(2) Login with username,
password.
(1) Client requests to login the
network.
(4) Approve or deny user
login to the LAN.
(3) Send username, password to
RADIUS server.
1
2
4
3
1 Client requests to log in to the network 3 Username and password sent to RADIUS server
2 Log in with username and password
4 User login to the LAN approved or denied
IEEE 802.1x Access Client RADIUS Client RADIUS Server