INTELLINET NETWORK 525152 Wireless 150N High-Power USB Adapter User Manual - Manual (Page 22)

want to direct link to and click “Apply” to add to the DLS Status
table (below).
- Timeout Value: Specify the timeout value for the direct link being
set up.
ABOUT
On this screen, you can click the hyperlink for information on the wireless
chipset manufacturer. Basic information about the utility (driver, EEPROM
version, etc.) also displays, as do various addresses for quick reference.
NOTE: This adapter features Turbo Mode, which delivers a higher
throughput than IEEE 802.11g standard (up to 54 Mbps) by compressing
data and decreasing the wait time for sending data to routers or access
points. Turbo Mode is enabled automatically without any configuration.
WPS CONFIGURATION
The adapter supports WPS (Wi-Fi Protected Setup), allowing connection
to wireless APs that also support WPS without complicated procedures.
Two WPS configuration methods are available when you click to display
this screen: PBC (push-button configuration) and PIN Code (an option
for older APs not equipped with the WPS push button but which may be
transformed into a WPS-enabled access point through a firmware upgrade).
22
CONFIGURATION