INTELLINET NETWORK 525206 Wireless 300N High-Gain USB Adapter User Manual - Manual (Page 28)

24
Parameter Description
Beacon Interval This specifies the duration between beacon packets
(milliseconds). The range for the beacon period is 20-1000
milliseconds, with a typical value of 100.
DTIM Period This determines the interval the access point will send its
broadcast traffic. Default value is 3 beacons.
Preamble The preamble defines the length of the CRC block for
communication among the wireless stations. There are two
modes: Long and Short. High network traffic areas should use the
shorter preamble type.
Set Defaults Click to return all settings to default values.
Apply Confirm the settings on the “Advanced“ screen.
3.8.3 AP Statistics
You can get real-time information about the packet transmission and receiving status during wireless
communication from this screen. To recount the statistics value, click “Reset.“