INTELLINET NETWORK 525282 iStream HD Wireless Media Adapter User Manual - Manual (Page 19)

- 19 -
Advanced Configuration Menu Options
The Quick Setup pages allow connecting the iStream HD to a wireless network.
Refer to chapter “Installation -> Manual Installation” for details.
Item Description
Fragment Threshold The fragmentation threshold is used to set the maximum size of
a packet that a client will send. The smaller the maximum sizes,
the better the reliability of the wireless connection — but the
performance is likely to decrease. Leave this value as 2346
unless you have a very poor wireless signal. Lowering the value
can help improve the connection in such cases.
RTS Threshold In case you experience poor wireless performance, you can try
using values between 1200 and 500, and below 500 in severe
cases. The default value is 2347, and that should normally not be
modified.
Channel Width Select the wireless channel width. 40MHz provides better
network speed for 802.11n wireless clients. “Auto 20/40 MHz” is
the recommended value.
WMM Enable or disable Wireless Multi-Media. When enabled, this
device will give priority to multimedia-related network
applications so they will have better performance. It is
recommended to leave this option enabled.
If you wish to deactivate the LEDs of the iStream HD, you can do so here. You
have the choice of either turning off all LEDs or all but the Power LED.