Alliance Laundry Systems UC80PN - Manual (Page 25)

F232073 23
Safety
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3. Use the Up or Down key to select the desired
fill temperature. See the following table for fill
options.
4. Press the Start key.
5. Use the Up or Down key to select the desired
fill level. See the following table.
6. Press the Start key.
7. Use the Up or Down key to select the desired
supply option. See the table below.
8. Press the Start key.
9. If the machine is equipped with an auxiliary
heating system, use the Up or Down key to
select the desired segment temperature. To
disable auxiliary heat for this segment, set this
value to zero.
Note: Do not program heat steps for machines not
equipped with auxiliary heat. The machine will
pause for 30 minutes during any step in which the
fill water temperature does not already equal or
exceed the programmed value of the heat step.
10. Press the Start key.
Fill Temperature Options
Display Fill Type
CFIL Cold fill
HFIL Hot fill
bFIL Warm fill
Water Level Options
Display Fill Level
LOLE Low Level
HILE High Level
Supply Options
Display Supply
SUP0 No Supply
SUP1 Supply 1
SUP2 Supply 2
SUP3 Supply 3
SUP4 Supply 4
SUP5 Supply 1 and 2
SUP6 Supply 2 and 3
SUP7 Supply 3 and 4