Asus A7A266 - Manual (Page 60)

ASUS A7A266 User’s Manual 60
4. BIOS SETUP
4. BIOS SETUP
4.4 Advanced Menu
Advanced
Menu
CPU Speed
In JumperFree™ Mode, this field allows you to select the internal frequency
of your CPU. Select [Manual] if you want to make changes to the subse-
quent 2 fields. Note that selecting a frequency higher than the CPU manu-
facturer recommends may cause the system to hang or crash. See System
Hangup on page 60. Configuration options: [Manual] [700MHz] [933Mhz]
System/SDRAM/PCI (MHz)
(When CPU Internal Frequency is set to [Manual])
This field determines the frequency ratio among the Front Side
Bus, SDRAM, and PCI bus. You may set the memory clock
frequency in synchronous or asynchronous mode with respect
to the Front Side Bus frequency. Configuration options:
[66:100:33] [100:100:33] [133:133:33] [133:100:33]
Available options
when FSB:SDRAM:PCI Freq. Ratio
is set to [133:133:33]
CPU Vcore
In JumperFree mode, this field displays the core voltage sup-
plied to the CPU. If you want to set it manually, always refer
to the CPU documentation. The picture shown here provides only
an example of possible Vcore ranges.
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields allow you to choose from the default of [Enabled] or choose
[Disabled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache.
Configuration options: [Disabled] [Enabled]