INSTEON Mini Remote Switch 2342-242/2444A3WH, 2342-442, 2342-542 Manual - Manual (Page 9)

Page 9 of 16 2342-242/2444A3, 2342-442, 2342-542 Rev: 1/21/2014 7:24 AM
Remove Multiple Responders from a Scene (Multi-Unlink)
1) Tap the Mini Remote paddle (top or bottom) – if in 2 scene mode, tap the top of the paddle for scene
1 or the bottom for scene 2
2) Press & Hold Set Button for 3 seconds - until you hear a beep
Mini Remote’s LED will blink green
3) Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
Mini Remote’s LED will blink red
4) Tap Set Button
Mini Remote’s LED will double-blink red
5) For each Responder you wish to remove from scene, Press & Hold its Set Button until Mini Remote
double-beeps
Mini Remote’s LED will continue to double-blink red
6) When all your devices have been removed, tap Mini Remote’s Set Button
Mini Remote will double-beep and its LED will turn off
Change Paddle / Scene Configuration (e.g. Change to 2 Scene Mode)
1. Press & Hold Set Button for 3 seconds - until you hear a beep
Mini Remote’s LED will blink green
2. Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
Mini Remote’s LED will blink red
3. Press & Hold Set Button a 3
rd
time for 3 seconds - until you hear a beep
Mini Remote’s LED will blink green
4. Press & Hold Set Button a 4
th
time for 3 seconds - until you hear a beep
Mini Remote’s LED will blink red
5. Tap Set Button
Mini Remote’s LED will blink red
6. Press the appropriate paddle for the desired button/scene configuration
Desired Configuration Paddle to Press
2 Scene Toggle Bottom
2 Scene Non-Toggle (Always On) Bottom twice
1 Scene (Default) Top
Mini Remote will double-beep and its LED will turn off
7. To confirm the configuration, tap the bottom of the paddle several times
Mini Remote’s LED will flash as follows