Hach-Lange DRB 200 Thermostat - Manual (Page 16)

16
Instrument Use
2. Press the right arrow key to scroll through the menu.
Select the required language (see Table 1).
3. The instrument is automatically initialized and is then
ready for operation.
2.1.2 Adjusting the Contrast
1. Hold down the middle key while switching on the
instrument.
2. Use the up and down arrow keys to adjust the contrast.
3. Press OK to accept the changes.
2.2 Routine Operation
1. Switch on the instrument.
2. Select the required temperature program using the
appropriate keys (see section 2.4 on page 17).
3. Prepare the test vials as described in the analysis
procedure.
4. The instrument will be heated to the set temperature.
Two beeps indicate that the required temperature has
been reached.
Language
S PL
Language
E NL
Language
F I
Language
GB D
Table 1 Language Settings
Abbreviation Country
GB English
D Germany
F France
I Italy
E Spain
NL Netherlands
S Sweden
PL Poland
DK Denmark
COD TOC
Start Start
80°C TOC
Start
150°C TOC
Start Start
150°C TOC
87’ Start