Hach-Lange BUHLER 2000 Water sampler - Manual (Page 39)

Operation
Page 39 Manual Bühler 2000/1029
MODEM SETTINGS
2.8.3
**********************
MODEM
*GSM (CELLULAR)
AT-COMPATIBLE
NO MODEM
**********************
Select the type of modem.
Attention: Please make sure that the baud rate setting of CPU
and modem is identical!
3.9.5
**********************
GSM-PIN
PIN: ****
REPEAT:
****
**********************
Enter the corresponding GSM Pin No. and repeat it once to confirm.
Remark: The PIN check only serves for authorization. The PIN
cannot be changed here.
3.9.1
**********************
INITIALIZE MODEM
*START
**********************
Start the initialization of the modem by pressing the ENT key.
If the system does not recognize the modem, an „error message“ is
displayed. If this is the case, check the installation and the
configuration of the modem (see modem manual).
3.9.2
**********************
DEVICE
INDENTIFICATION
SAMPLER 1 >
**********************
For identification you can enter a name for the sampler by pressing
the ENT key.
The keyboard of the control unit is used in the same way as the
keys of a portable phone:
1 = 1 2 = abc2 3 = def3
4 = ghi4 5 = jkl5 6 = mno6
7 = pqrs7 8 = tuv8 9 = wxyz9
0 = - _@ .0
3.9.3
**********************
SENDING OF SMS
ACTIVE:
*YES
NO
**********************
Select YES if the alarm messages shall be sent via SMS.
4.15.1
**********************
NUMBER FOR SMS:
49174356984 >
**********************
Press the ENT key to enter the SMS number.
If you entered a wrong number, press the left key  to delete.
Remark: Enter the country code without 0 or + !