Hach-Lange BUHLER 2000 Water sampler - Manual (Page 23)

Operation
Page 23 Manual BÜHLER 2000/1029
EXAMPLES FOR STANDARD PROGRAMS
1. Programming of a „TIME-PROPORTIONAL“ sampling program
In this sampling mode, a sample is extracted as a function of a programmed time interval.
1.1.4
**********************
PROGRAM NO. 1
TIME
INTERVAL HRS. 0:06
FILLING TIME H 2:00
**********************
Selection of the program number:
After having pressed the ENT key, a program number (1 to 6) can be
entered.
Confirm by pressing the ENT key.
Next menu: press the „DOWN“ arrow key.
1.1.5
**********************
PROGRAM NO. 1
*CHANGE
DELAYED START
START
**********************
PROGRAMMING
- Press the ENT key (cursor is displayed flashing)
- Press the „UP“ arrow key twice
- Confirm with ENT
2.2.1
**********************
PASSWORD
****
**********************
Enter the valid password (factory-set code is 6299).
Remark:
This is only required if a password has been activated in „Setup“->
„System settings“. If not, just press the ENT key and you will get to
the next menu!
If the right password has been entered, you will automatically get to
the next menu.
3.4.1
**********************
MODE
EVENT
*TIME
FLOW ANAL. 0-20 mA
**********************
The selected sampling mode is marked with a star.
If the sampling mode shall be changed, press the ENT key and move
the cursor on the sampling mode TIME to create a time-proportional
program.
Confirm the input by pressing the ENT key.
4.12.1
**********************
INTERVAL
00:10
**********************
Enter the sampling interval (hh:mm).
A sample is e.g. extracted every 10 minutes.
5.2.2
**********************
BOTTLE FILLING
*TIME-RELATED
SAMPLE-RELATED
**********************
Select whether the bottle filling shall be
1. time-dependent or
2. depend on a pre-programmed number of
samples