Asus A7N8X-E - Manual (Page 85)

ASUS A7N8X-E Deluxe motherboard 4-25
PWR button < 4 Secs [Suspend]
This field sets the delay after which the system powers off after depressing
the external case-mounted power button. The default setting powers off
the system instantly. Configuration options: [Soft-Off] [Suspend]
Power Up on PCI Device [Enabled]
This field enables Wake-On-LAN from soft-off mode. The default disables
this option. Configuration options: [Enabled] [Disabled]
Wake-Power Up On Ext. Modem [Disabled]
This field allows either settings of [Enabled] or [Disabled] for powering up
the computer when the external modem receives a call while teh computer
is in Soft-off mode. Configuration options: [Enabled] [Disabled]
Automatic Power Up [Disabled]
This field sets to enable or disable the automatic power up.When
[Enabled] the Time (hh:mm:ss) of Alarm field is enabled for input.
Configuration options: [Enabled] [Disabled]
Time (hh:mm:ss) of Alarm 0:00:00
This field sets the time for automatic power up. Enter the hour, minute and
second based on the 24 hour clock. The Automatic Power Up field must
be enabled to use this feature.
AC Power Loss Restart [Disabled]
This allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots the
system. [Previous State] sets the system back to the state it was before
the power interruption. Configuration options: [Disabled] [Enabled]
[Previous State]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on the keyboard to turn on
the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Any KEY]
[Power Key]