Hach-Lange ORBISPHERE 6110 OPC Instruction Manual - Manual (Page 14)

Error value Error description
0x00040000 Antifoam counter
0x00080000 Pending action
0x00100000 Pending manual action
0x00200000 No flow
0x00400000 RIM detector error
0x00800000 Upper limit
0x01000000 System initialization required
0x02000000 Communication error
0x04000000 ADIO board KO
0x08000000 CTRL board KO
0x10000000 EC board KO
0x20000000 CO2 foam out of specifications
0x40000000 Foam too many times
"Messages.Message Out.Warnings" item
This output item provides information about any warning(s) associated with the system. A warning
does not prevent the instrument from running a measurement analysis. This is a flag field where the
indicated value is computed by the addition of all active warnings.
The list items are identical to those listed in the corresponding errors table (see
"Messages.Message
Out.Errors" item on page 11).
"Messages.Message Out.Message In Last Error" item
This item indicates the last error raised by an incoming OPC message. For example, when a
"Message In.New Package" item (see
"Messages.Message In.New Package" item on page 10)
requests setting the package to one that is not defined on the 6110 instrument, the error value will be
"POOR".
Note: In the following table "par_name" represents the parameter name to which the error relates.
Error value Error description
NONE No error
UNKN par_name Unknown parameter
POOR par_name Parameter out of range
TYPE par_name Parameter wrong type
DENY par_name Parameter access denied
NR par_name Not ready, a command has been received at the wrong
time
12 English