Printing calibration data, Usb installation and operation – Hach-Lange HQ Series Portable Meters User Manual
Page 3
3
USB Installation and Operation
3.
Use the
UP
and
DOWN
keys to select the desired report type.
Press the
GREEN/RIGHT
key under OK.
Printing calibration data
Calibration data are printed as part of the data log, but can also be
printed from the stored information in the probe. Printed calibration
reports are shown in Viewing Calibration Reports in the HQd Series
Portable Meters user manual.
To print the calibration data stored in the probe:
1.
Press the
DATA LOG
key.
2.
Use the
UP
and
DOWN
keys to highlight View Probe Data.
Press the
GREEN/RIGHT
key under Select.
Note: A probe must be connected to the meter to use the View Probe
Data function.
3.
If only one probe is connected, proceed to step
4.
If two probes
are connected (HQ40d), the connected probes will be
displayed. Use the
UP
and
DOWN
keys to highlight the desired
probe. Press the
GREEN/RIGHT
key under Select.
4.
Use the
UP
and
DOWN
keys to highlight Send Current
Calibration or Send Calibration History:
•
Send Current Calibration: sends the most recent
calibration information.
•
Send Calibration History: sends all calibration
information that is stored in the probe.
Press the
GREEN/RIGHT
key under Select.