Hydrotech 5600 SE Valve Carbon & Multi-Media Filter Operation Manual - Manual (Page 6)

4
Operating Instructions
The Valve has been pre-programmed with factory settings as follows:
Regeneration Step Cycle Programming
1. Backwash 6 minutes
2. Brine/Rinse 0 minutes - not applicable
3. Rapid Rinse 4 minutes
4. Brine Refill 0 minutes - not applicable
Set Down Button
Set Up Button
P.M. Indicator
Flow Indicator:
Flashing Dot With Water Flow
Service Indicator:
Valve in Service - Dot On
Extra Cycle Tonight - Flashing Dot
Figure 4