Repair service – Hydrotech MP Series PULSAtron User Manual
Page 31
REPAIR SERVICE
Normally following the instructions in the previous sections of the manual will rectify any pump problems. If, however,
after following these instructions the pump does not perform properly, it can be returned for repair. Please follow
the instructions below:
1.
Pump cannot be serviced properly if the original pump nameplate or data contained on the nameplate is not
intact.
2.
Thoroughly flush pumphead and outside of pump with water or a suitable fluid to neutralize any residual chemical
left in pump.
3.
Include written explanation of the following:
A)
Problem ________________________________________________________________________
B)
Pumped Fluid ___________________________________________________________________
Name ______________________________________________________________________
Viscosity ___________________________________________________________________
Fluid Temperature ____________________________________________________________
C)
Pressure @ Discharge ____________________________________________________________
@ Suction __________________________________________________________________
or Suction Lift _______________________________________________________________
D)
Environmental Temperature _________________________________________________________
E)
Electrical Service _________________________________________________________________
Volts _______________________________________________________________________
Hz ________________________________________________________________________
Phase _____________________________________________________________________
F)
Nameplate Data __________________________________________________________________
Series _____________________________________________________________________
Serial # ____________________________________________________________________
KOPkit # ___________________________________________________________________
4.
Package the pump in the original box if available and send to the address specified by your pump supplier.
31