Hydrotech Reverse Osmosis Drinking Water System - Manual (Page 13)

11
Connecting Components
a. Connect the 1/4" white tube to the elbow of sump
#1. The other end of the elbow should be connected
to inlet saddle valve. Refer to inlet saddle valve
installation on page 6. b. Cut 3/8” blue tubing supplied to the desired length.
Connect the 3/8" blue tube from the (90° elbow)
granular activated carbon post-filter (Sump #3) fitting
to the quick connect fitting on the faucet adapter.
Refer to faucet installation on page 9.
c. Connect the 3/8" white tube to the center of the
male tee located on the top of the bracket. Connect
the other end of the tube to the storage tank. Refer
to the storage tank connection installation on page
7. d. Connect the 1/4" red
tube to the flow
restrictor and attach the
other end to the drain
saddle valve. Refer to
the drain saddle valve
installation on page 7.
Flow Restrictor
3/8”
White
Tubing
1/4”
White
Tubing
3/8”
Blue
Tubing
to
faucet
Sump
#3
Sump #1
RO
Membrane
1/4”
Red
Tubing