Hydrotech 5600 Econominder Service Manual - Manual (Page 3)

Model 5600 & 5600 Econominder ®
3
Job Specification Sheet
Job Number ___________________________________
Model Number ________________________________
Water Test ____________________________________
Capacity of Unit ________________________ Max. _____________ Per Regeneration
Mineral Tank Size: Diameter ___________________ Height _____________________
Brine Tank Size and Salt Setting Per Regeneration: ___________________________________
Control Valve Specifications
Type of Timer: ___ Std. ___ "L" ___ 7-day ___ 12-day ___ Meter, Std. ___ Meter, Ext.
Day/Time of Regeneration _____________________________
Drain Line Flow Control _______________________________ gpm
Brine Refill Rate _____________________________________ gpm
Injector Size ________________________________________
Meter Gallon Setting _________________________________ gal
NOTE: Due to varying water conditions, tank sizes and water pressures, use the above settings as guidelines only.
1
BLFC (Brine Line Flow Control), refill rate for filling brine tank.
2 DLFC (Drain Line Flow Control), backwash and rapid rinse flow rates.
Tank Size
(diameter) Injector
Slow Rinse
Rate (gpm)
@ 40 psi
Brine Draw
Rate (gpm)
@ 40 psi BLFC 1 BLFC
2
6"
7" #0 red
#0 red .31 gpm
.31 gpm .28 gpm
.28 gpm .5 gpm
.5 gpm 1.2 gpm
1.2 gpm
8"
9"
10"
#1 white
#1 white
#1 white .45 gpm
.45 gpm
.45 gpm .38 gpm
.38 gpm
.38 gpm .5 gpm
.5 gpm
.5 gpm 1.5 gpm
2.0 gpm
2.4 gpm
12"
13" #2 blue
#2 blue .84 gpm
.84 gpm .56 gpm
.56 gpm 1.0 gpm
1.0 gpm 3.5 gpm
4.0 gpm
14"
16" #3 yellow
#3 yellow 1.0 gpm
1.0 gpm .63 gpm
.63 gpm 1.0 gpm
1.0 gpm 5.0 gpm
7.0 gpm