Audiovox AVXMTG9B/P/S - Manual (Page 22)

TROUBLE SHOOTING
IR remote is inoperative.
Disc will not play or wrong region is
displayed.
Play starts, but then stops immediately.
No sound or distorted sound.
Can’t advance through a movie.
1. Verify that the batteries in the remote are fresh.
2. Verify that the infrared remote sensor is not obstructed.
1. You can’t advance through the opening credits and warning information that
appears at the beginning of a movie because the disc is programmed to prohibit that
action.
1. Make sure your DVD is connected properly. Make sure all cables are securely
inserted into the appropriate jacks.
2. If you are using 2-channel IR headphones, make sure you turn on the IR headphone
power. Make sure the correct channel (A-B) is selected.
3. Make sure the modulator is ON and the proper frequency has been selected.
4. Make sure the IR transmitter has been turned on.
1. The disc is dirty. Clean it.
2. The disc is damaged. Try another disc.
3. Condensation has formed. Allow player to dry out.
1 Insert a disc with the label side facing up towards the headliner.
2. Check the type of the disc you put into the disc tray. This DVD only plays DVD,
audio CD, JPEG, and MP3.
3. Both the unit and the disc are coded by region. If the regional code doesn’t match,
the disc can’t be played.
PROBLEM SOLUTION
20
No Disc error message appears. 1. Insert a disc with the label side facing up towards the headliner.