Unpacking, Location and mounting – Hydra-Flex Aqua-Lab SD Installation Manual User Manual

Page 6

Installation Manual

- 3 -

Unpacking

The AQUA-LAB is shipped in a wooden crate if a pump system was
ordered, otherwise it will come via UPS.

1. Open the crate by cutting the straps
2. Un-bolt the AQUA-LAB from the pallet.
3. Lift the AQUA-LAB from the pallet. Use assistance if

necessary.

4. Dispose of pallet, cellophane and additional packaging

materials (Be sure not to discard of the manuals and
accessories box)

Location and Mounting

**Make sure to consider the proximity to feed water, power supply, and the control cabinet as well as space near the
system to store chemical containers.

Mounting of Components

• AQUA-LAB SD – Mount with 4 appropriate anchors

• Pump Assembly (if purchased)

Mount to concrete or cinder block wall with

4 concrete anchors – **Needs to be within 6’
of the AQUA-LAB system to connect them with
the included connection hose

• Motor Starter (if purchased)

Mount to the wall with 4 appropriate anchors