Hellwig Sway Bar 55764 - Manual

55809(R-55809) 8/17/2010
INSTALLATION INSTRUCTIONS
55809
GM A/G-Body Adjustable Rear Sway Bar
Thank you for purchasing a quality Hellwig Product.
1
559-734-7451 800-367-5480 FAX 559-734-7460
TORQUE TABLE
Bolt Size 3/8”— 35 ft lbs * Bolt Size 7/16”— 45 ft lbs* Bolt Size 1/2”—65 ft lbs *Bolt Size 9/16”— 90 ft lbs
SAFETY: BEFORE BEGINNING INSTALLATION BE SURE TO SET THE PARKING BRAKE AND
CHOCK THE FRONT WHEELS.
NOTE: TO PROPERLY ADJUST THE BAR, THE WEIGHT OF THE VEHICLE MUST BE ON THE SUS-
PENSION AS IF DRIVING DOWN THE ROAD.
NOTE: THIS KIT REQUIRES DRILLING THE FRAME RAIL AND POSSIBLE RELOCATION OF FUEL
AND BRAKE LINES. INSTALLER MUST ENSURE THAT THE SWAY BAR KIT WILL NOT INTER-
FERE WITH ANY FUEL OR BRAKE LINES OR HOSES.
IMPORTANT NOTE: SWAY BAR END LINKS MUST BE ATTACHED ON OUTER
HOLE PRIOR TO INITIAL USE.