Hellwig Air 6212 - Manual (Page 5)

Fasten plates
together with
flange nuts on
3/8 x 1” studs.
7. Place air spring assembly between the axle and the frame rail as shown and in-
sert threaded studs through mating holes in plates. Fasten plates together by at-
taching 3/8 flanged nuts to 3/8 x 1” studs in frame adapter only. Torque to 20-25
ft-lb.
8. Place reinforcement bracket on 3/8 x 1-1/2” studs and attach with 3/8” flanged
nuts. Slide bracket squarely against frame rail and tighten nuts to 20-25 ft-lb.
7
8
Driver Side
Slide reinforcement
bracket squarely
against frame rail
3/8 x 1-1/2” stud
6212 ( R-6212 ) 08/17/2012