Green Air Products Genesis TDS Calibration 800 ppm MSDS - Manual (Page 2)

Green Air Products, Inc.
Conductivity Calibration Solution
800 PPM
Health & Safety Data Sheets
SECTION 6 - ACCIDENTAL RELEASE MEASURES
In case of accidental spill or release:
Wear appropriate protective clothing.
If local regulations permit, mop up with plenty of water and run to waste, diluting greatly
with running water. Otherwise transfer to container and arrange removal by disposal
company.
SECTION 7 - HANDLING AND STORAGE
Handling:
Storage:
Under no circumstances eat or drink while Store at room temperature (@15º-25º C)
handling this material. Protect from direct sunlight & moisture
Wash hands and face after working with Keep container well closed
material. Keep away from children
SECTION 8 - EXPOSURE CONTROL/PERSONAL PROTECTION
As appropriate to quantity handled:
Respiratory protection:
Protective gloves:
Not applicable Rubber or plastic
Eye protection:
Goggles/face shield
SECTION 9 - PHYSICAL/CHEMICAL PROPERTIES
Appearance and odor:
Water reactivity:
Clear and colorless liquid Non-reactive
Odorless
Solubility in water:
Melting point: Boiling point:
Miscible in any proportion N/A > 100º C
SECTION 10 - STABILITY AND REACTIVITY
Stability:
Stable
SECTION 11 - TOXICOLOGICAL INFORMATION
In case of ingestion:
After ingestion of large amounts: nausea,
vomitting, cardiac dysrhythmia, cardiovascular
failure. However, when handled properly, hazardous effects are unlikely to occur.
Further data:
LD50 (oral-rat) = N/A
No evidence of mutagenic or teratogenic
effects.
2